Water Level Indicator

New WLI DUAL (V5)

  • small hardware changes. Only one PCB board is used now.
  • a mounting depth 10 mm version can be ordered. (Cables will go out from WLI instead of connectors)
  • parallel working (connection) of more WLIs is now allowed.

Water Level Indcator Dual

The Assembling KIT available on request only

New WLI (V2) new WLI TWIN (V2)

  • user has now possibility to set tank volume from 10 to 990 (step value  is 1 for tank value 10 to 50,  5 for 50 to 100, 10 for 100 to 990)
  • possibility to set units: Litres, Liters or Gallons

Water Level Indicator

  The Water Level Indicator (WLI) is designed for precise water level measuring in mobile homes, caravans and boats.

FrontPage
  •  WLI  device (basic version) user can choose to display either “Fresh” or “Gray” water displaying mode simply using the jumper on the backside of WLI.
  • Hundred levels are displayed. (Similar products displays only 5 to 10 level.)
  • The WLI is equipped with ON / OFF touch area instead of mechanical switch due to faults minimization.
  • OFF current consumption:  only 170 uA! (at 13.8V).
  • Sensitivity 1% accuracy -+2% at 11V to 13.8V (normal voltage range for 12V car accumulator.)
  • Possibility to view tank volume in Liters (Litres, Gallons)
  • WLI can displays correct value even if linear transmitter is installed in irregular shaped water tank. (must be programed individually)
  • The WLI’s 18 mm mounting depth allows flush mounting into commercial furniture boards to ensure that an optimum installation place can always be chosen without losing precious storage space.
  • Activation of the tank transmitter is effected together with the WLI (No power on tank transmitter when WLI is switched-off).
  • possibility to redesign front panel by customer wants
  • full specification in User manual

WLI requires installation of a tank transmitter (measuring sensor) for example Votronic Tank Electrode 15-50 K or Tank Electrode 12-24 K.

WLI DUAL

  •  WLI DUAL displays both, Fresh and Gray tank water level at the same time.
  • The vehicle voltage is displayed on the WLI DUAL
  • Same dimensions as WLI “basic version”
  • Automatic switch-off in case of supply voltage overvoltage

WLI TWIN

  • WLI TWIN can display fresh and gray water on one device. Select the displayed tank by touching the left touch pad.
  • The vehicle voltage is displayed on the WLI TWIN
  • Same dimensions as WLI “basic version”

I am currently too busy, selling only for request on kuzytronic@gmail.com Sending time 2-3 weeks.

Thank you for your trust. WLI was already sent to UK, USA, Germany, Belgium, Netherlands, Sweden, Norway, Romania, France, Russia and Pakistan.